Skip to main content

tcld namespace command reference

The tcld namespace commands enable Namespace operations in Temporal Cloud.

Alias: n

add-region​

Use tcld namespace add-region to add a standby region to an existing Temporal Cloud Namespace. Enrolling a second region upgrades the Namespace to multi-region. Once provisioned, the multi-region Namespace enables Temporal Cloud to start replicating Workflow Execution data from the active to the standby region and trigger failover during adverse conditions.

tcld namespace add-region

Alias: none

caution

To end multi-region service and discontinue replication charges, contact Temporal Support directly. You can't use tcld to remove a region from a Namespace.

The following modifiers control the behavior of the command.

--ca-certificate​

Required modifier unless --ca-certificate-file is specified

A base64-encoded CA certificate.

If both --ca-certificate and --ca-certificate-file are specified, only --ca-certificate is used.

Alias: -c

--namespace​

Specify a Namespace hosted on Temporal Cloud. If not specified, the value of the environment variable $TEMPORAL_CLOUD_NAMESPACE is used.

Alias: -n

Required modifier

--region​

The region to add to the existing Namespace.

Valid options: ap-northeast-1 | ap-northeast-2 | ap-south-1 | ap-southeast-1 | ap-southeast-2 | eu-central-1 | eu-west-1 | eu-west-2 | ca-central-1 | us-east-1 | us-east-2 | us-west-2

See Service Availability. The sa-east-1 region is not supported at this time.

Alias: --re

Required modifier

create​

The tcld namespace create command creates a Temporal Namespace in Temporal Cloud.

Alias: c

tcld namespace create

The following modifiers control the behavior of the command.

--request-id​

The request identifier to use for the asynchronous operation. If not set, the server assigns an identifier.

Alias: -r

--ca-certificate​

Required modifier unless --ca-certificate-file is specified

A base64-encoded CA certificate.

If both --ca-certificate and --ca-certificate-file are specified, only --ca-certificate is used.

Alias: -c

--namespace​

Specify a Namespace hosted on Temporal Cloud. If not specified, the value of the environment variable $TEMPORAL_CLOUD_NAMESPACE is used.

Alias: -n

Required modifier

--region​

The region to create the Namespace in.

When one --region flag is used, tcld provisions a single-region namespace. In single-region use, Temporal clients connect to a single Namespace in one deployment region.

When two --region flags are provided, your Namespace is provisioned to use Temporal Cloud multi-region Namespace (MRN) service. Once provisioned, MRN enables Temporal Cloud to start replicating Workflow Execution data from the active to the standby region and trigger failover during adverse conditions.

Valid options: ap-northeast-1 | ap-southeast-1 | ap-southeast-2 | ca-central-1 | eu-central-1 | eu-west-1 | eu-west-2 | us-east-1 | us-west-2

Alias: --re

Required modifier

caution

To end multi-region service and end charges, contact Temporal Support directly. You can't use tcld to remove a region from a namespace.

--retention-days​

The number of days that data about closed Workflow Executions will be retained (default: 30).

Alias: --rd

--ca-certificate-file​

Required modifier unless --ca-certificate is specified

A path to a CA certificate PEM file.

If both --ca-certificate and --ca-certificate-file are specified, only --ca-certificate is used.

Alias: --cf

--certificate-filter-file​

Required modifier unless --certificate-filter-input is specified

Path to a JSON file that defines the certificate filters to be applied to the Namespace. The specified filters replace any existing filters.

Sample JSON: { "filters": [ { "commonName": "test1" } ] }

If both --certificate-filter-file and --certificate-filter-input are specified, the command returns an error.

Alias: --cff

--certificate-filter-input​

Required modifier unless --certificate-filter-file is specified

A JSON string that defines the certificate filters to be applied to the Namespace. The specified filters replace any existing filters.

Sample JSON: { "filters": [ { "commonName": "test1" } ] }

If both --certificate-filter-input and --certificate-filter-file are specified, the command returns an error.

Alias: --cfi

--search-attribute​

Required modifier; can be specified more than once

A custom Search Attribute in the form _name_=_type_.

Valid values for type: Bool | Datetime | Double | Int | Keyword | Text

Alias: --sa

--user-namespace-permission​

Can be specified more than once

A Namespace-level permission for a user in the form _email_=_permission_.

Valid values for permission: Admin | Write | Read

Alias: -p

--endpoint​

The codec server endpoint to decode payloads for all users interacting with this Namespace. Must be HTTPS.

Alias: -e

--pass-access-token​

Pass the user access token to the remote endpoint (default: false).

Alias: --pat

--include-credentials​

Include cross-origin credentials (default: false).

Alias: --ic

Example

tcld namespace create --namespace <namespace_id> --region us-west-2 --retention-days 60 --certificate-filter-input '{"filters": [{"commonName": "test1"}]}' --user-namespace-permission "user@example.com=Admin" --search-attribute "customer_id=Int" --search-attribute "customer_name=Text" --endpoint "https://test-codec-server.com" --pass-access-token --include-credentials

delete​

The tcld namespace delete command deletes the specified Namespace in Temporal Cloud.

Alias: d

tcld namespace delete

The following modifiers control the behavior of the command.

--namespace​

Specify the Namespace hosted on Temporal Cloud to be deleted.

Alias: -n

Required modifier

--request-id​

The request identifier to use for the asynchronous operation. If not set, the server assigns an identifier.

Alias: -r

--resource-version​

A resource version (ETag) to update from. If not set, the CLI uses the latest.

Alias: -v

Example

tcld namespace delete --namespace <namespace_id>

failover​

Failover a Temporal Namespace. A failover switches a Namespace region from the active region to the standby region.

--request-id​

Specify a request identifier to use for the asynchronous operation. If not specified, the server assigns a request identifier.

Alias: -r

--namespace​

Specify a Namespace hosted on Temporal Cloud. If not specified, the value of the environment variable $TEMPORAL_CLOUD_NAMESPACE is used.

Alias: -n

Required modifier

--region​

The region to failover to.

Valid options: ap-northeast-1 | ap-northeast-2 | ap-south-1 | ap-southeast-1 | ap-southeast-2 | eu-central-1 | eu-west-1 | eu-west-2 | ca-central-1 | us-east-1 | us-east-2 | us-west-2

See Service Availability. The sa-east-1 region is not supported at this time.

Alias: --re

Required modifier

--ca-certificate​

Required modifier unless --ca-certificate-file is specified.

A base64-encoded CA certificate.

If both --ca-certificate and --ca-certificate-file are specified, only --ca-certificate is used.

Alias: -c

--cloud-provider​

The cloud provider of the region to failover to.

Default: aws (default: "aws")

get​

The tcld namespace get command gets information about the specified Namespace in Temporal Cloud.

Alias: g

tcld namespace get

The following modifier controls the behavior of the command.

--namespace​

Specify a Namespace hosted on Temporal Cloud. If not specified, the value of the environment variable $TEMPORAL_CLOUD_NAMESPACE is used.

Alias: -n

Example

tcld namespace get --namespace <namespace_id>

list​

The tcld namespace list command lists all Namespaces in Temporal Cloud.

Alias: l

tcld namespace list

The command has no modifiers.

export​

The tcld namespace export s3 commands manage Workflow History Exports.

Valid options: s3

Alias: es

create​

The tcld namespace export s3 create command allows users to create an export sink for the Namespace of a Temporal Cloud account.

Example

tcld namespace export s3 create --namespace <namespace_id> --sink-name <sink_name> --s3-bucket-name <bucket_name> --role-arn <role_arn>

The following modifiers control the behavior of the command.

--namespace​

Specify a Namespace hosted on Temporal Cloud. If not specified, the value of the environment variable $TEMPORAL_CLOUD_NAMESPACE is used.

Alias: -n

Required modifier

--sink-name​

Provide a name for the export sink.

Required modifier

--role-arn​

Provide role arn for the IAM Role.

Required modifier

--s3-bucket-name​

Provide the name of an AWS S3 bucket that Temporal will send closed workflow histories to.

Required modifier

--request-id​

Specify a request identifier to use for the asynchronous operation. If not specified, the server assigns a request identifier.

Alias: -r

--kms-arn​

Provide the ARN of the KMS key to use for encryption. Note: If the KMS ARN needs to be added or updated, users should create the IAM Role with KMS or modify the created IAM Role accordingly. Providing it as part of the input won't help.

get​

The tcld namespace export s3 get command allows users to retrieve details about an existing export sink from the Namespace of a Temporal Cloud account.

Example

tcld namespace export s3 get --namespace <namespace_id> --sink-name <sink_name>

The following modifiers control the behavior of the command.

--namespace​

Specify a Namespace hosted on Temporal Cloud. If not specified, the value of the environment variable $TEMPORAL_CLOUD_NAMESPACE is used.

Alias: -n

Required modifier

--sink-name​

Provide the name of the export sink you wish to retrieve details for.

Required modifier

delete​

The tcld namespace export s3 delete command allows users to delete an existing export sink from the Namespace of a Temporal Cloud account.

Example

tcld namespace export s3 delete --namespace <namespace_id> --sink-name <sink_name>

The following modifiers control the behavior of the command.

--namespace​

Specify a Namespace hosted on Temporal Cloud. If not specified, the value of the environment variable $TEMPORAL_CLOUD_NAMESPACE is used.

Alias: -n

Required modifier

--sink-name​

Provide the name of the export sink you wish to delete.

Required modifier

--resource-version​

Specify a resource version (ETag) to delete from. If not specified, the CLI will use the latest version.

Alias: -v

--request-id​

Specify a request identifier to use for the asynchronous operation. If not specified, the server assigns a request identifier.

Alias: -r

list​

The tcld namespace export s3 list command allows users to list all existing export sinks within the Namespace of a Temporal Cloud account.

Example

tcld namespace export s3 list --namespace <namespace_id>

The following modifiers control the behavior of the command.

--namespace​

Specify a Namespace hosted on Temporal Cloud. If not specified, the value of the environment variable $TEMPORAL_CLOUD_NAMESPACE is used.

Alias: -n

Required modifier

--page-size​

Determine the number of results to return per page for list operations. If not specified, the default value is 100.

--page-token​

Provide the page token to continue listing results from where the previous list operation left off.

update​

The tcld namespace export s3 update command allows users to modify the details of an existing export sink within the Namespace of a Temporal Cloud account.

Example

tcld namespace export s3 update --namespace <namespace_id> --sink-name <sink_name> --enabled true

The following modifiers control the behavior of the command.

--namespace​

Specify a Namespace hosted on Temporal Cloud. If not specified, the value of the environment variable $TEMPORAL_CLOUD_NAMESPACE is used.

Alias: -n

Required modifier

--sink-name​

Provide the name of the export sink you wish to update.

Required modifier

--enabled​

Specify whether the export is enabled or not.

--role-arn​

Update the role ARN for the IAM Role.

--s3-bucket-name​

Update the name of the AWS S3 bucket that Temporal will send closed workflow histories to.

--resource-version​

Specify a resource version (ETag) to update from. If not specified, the CLI will use the latest version.

Alias: -v

--kms-arn​

Update the ARN of the KMS key used for encryption. Note: If the KMS ARN needs to be added or updated, users should create the IAM Role with KMS or modify the created IAM Role accordingly. Providing it as part of the input won't help.

--request-id​

Specify a request identifier to use for the asynchronous operation. If not specified, the server assigns a request identifier.

Alias: -r

validate​

The tcld namespace export s3 validate command allows users to validate an export sink from the Namespace of a Temporal Cloud account.

Example

tcld namespace export s3 validate --namespace <namespace_id> --sink-name <sink_name> --s3-bucket-name <bucket_name> --role-arn <role_arn>

The following modifiers control the behavior of the command.

--namespace​

Specify a Namespace hosted on Temporal Cloud. If not specified, the value of the environment variable $TEMPORAL_CLOUD_NAMESPACE is used.

Alias: -n

Required modifier

--sink-name​

Provide the name of the export sink you wish to retrieve details for.

Required modifier

--role-arn​

Provide role arn for the IAM Role.

Required modifier

--s3-bucket-name​

Update the name of the AWS S3 bucket that Temporal will send closed workflow histories to.

--kms-arn​

Update the ARN of the KMS key used for encryption. Note: If the KMS ARN needs to be added or updated, users should create the IAM Role with KMS or modify the created IAM Role accordingly. Providing it as part of the input won't help.

accepted-client-ca​

The tcld namespace accepted-client-ca commands manage the client CA certificates of the specified Namespace in Temporal Cloud. The certificates are used to verify client connections.

note

Base64 versions of the CA certificate files are accepted by these commands.

Alias: ca

info

Do not use a CA certificate that is signed with an insecure signature algorithm, such as SHA-1. Such signatures will be rejected. Existing CA certificates that use SHA-1 can stop working without warning.

For more information about the vulnerabilities of SHA-1, see SHAttered.

add​

The tcld namespace accepted-client-ca add command adds client CA certificates to a Namespace in Temporal Cloud.

tcld namespace accepted-client-ca add --ca-certificate <value>

Alias: a

The following modifiers control the behavior of the command.

--namespace​

Specify a Namespace hosted on Temporal Cloud. If not specified, the value of the environment variable $TEMPORAL_CLOUD_NAMESPACE is used.

Alias: -n

Example

tcld namespace accepted-client-ca add --namespace <namespace_id> --ca-certificate <encoded_certificate>

--request-id​

Specify a request identifier to use for the asynchronous operation. If not specified, the server assigns a request identifier.

Alias: -r

Example

tcld namespace accepted-client-ca add --request-id <request_id> --ca-certificate <encoded_certificate>

--resource-version​

Specify a resource version (ETag) to update from. If not specified, the latest version is used.

Alias: -v

Example

tcld namespace accepted-client-ca add --resource-version <etag> --ca-certificate <encoded_certificate>

--ca-certificate​

Required modifier unless --ca-certificate-file is specified

Specify a base64-encoded string of a CA certificate PEM file.

If both --ca-certificate and --ca-certificate-file are specified, only --ca-certificate is used.

Alias: -c

Example

tcld namespace accepted-client-ca add --ca-certificate <encoded_certificate>

--ca-certificate-file​

Required modifier unless --ca-certificate is specified

Specify a path to a CA certificate PEM file.

If both --ca-certificate and --ca-certificate-file are specified, only --ca-certificate is used.

Alias: -f

Example

tcld namespace accepted-client-ca add --ca-certificate-file <path>

list​

The tcld namespace accepted-client-ca list command lists the client CA certificates that are currently configured for a Namespace in Temporal Cloud.

tcld namespace accepted-client-ca list

Alias: l

The following modifier controls the behavior of the command.

--namespace​

Specify a Namespace hosted on Temporal Cloud. If not specified, the value of the environment variable $TEMPORAL_CLOUD_NAMESPACE is used.

Alias: -n

Example

tcld namespace accepted-client-ca list --namespace <namespace_id>

remove​

The tcld namespace accepted-client-ca remove command removes client CA certificates from a Namespace in Temporal Cloud.

tcld namespace accepted-client-ca remove --ca-certificate <value>

Alias: r

The following modifiers control the behavior of the command.

--namespace​

Specify a Namespace hosted on Temporal Cloud. If not specified, the value of the environment variable $TEMPORAL_CLOUD_NAMESPACE is used.

Alias: -n

Example

tcld namespace accepted-client-ca remove --namespace <namespace_id> --ca-certificate <encoded_certificate>

--request-id​

Specify a request identifier to use for the asynchronous operation. If not specified, the server assigns a request identifier.

Alias: -r

Example

tcld namespace accepted-client-ca remove --request-id <request_id> --ca-certificate <encoded_certificate>

--resource-version​

Specify a resource version (ETag) to update from. If not specified, the latest version is used.

Alias: -v

Example

tcld namespace accepted-client-ca remove --resource-version <etag> --ca-certificate <encoded_certificate>

--ca-certificate​

Required modifier unless --ca-certificate-fingerprint or --ca-certificate-file is specified

Specify the base64-encoded string of a CA certificate PEM file.

If --ca-certificate-fingerprint is also specified, both --ca-certificate and --ca-certificate-file are ignored.

If --ca-certificate-file is also specified but --ca-certificate-fingerprint is not, only --ca-certificate is used.

Alias: -c

Example

tcld namespace accepted-client-ca remove --ca-certificate <encoded_certificate>

--ca-certificate-file​

Required modifier unless --ca-certificate-fingerprint or --ca-certificate is specified

Specify a path to a CA certificate PEM file.

If --ca-certificate-fingerprint is also specified, both --ca-certificate-file and --ca-certificate are ignored.

If --ca-certificate is also specified but --ca-certificate-fingerprint is not, only --ca-certificate is used.

Alias: -f

Example

tcld namespace accepted-client-ca remove --ca-certificate-file <path>

--ca-certificate-fingerprint​

Required modifier unless --ca-certificate or --ca-certificate-file is specified

Specify the fingerprint of a CA certificate.

If --ca-certificate, --ca-certificate-file, or both are also specified, they are ignored.

Alias: --fp

Example

tcld namespace accepted-client-ca remove --ca-certificate-fingerprint <fingerprint>

set​

The tcld namespace accepted-client-ca set command sets the client CA certificates for a Namespace in Temporal Cloud.

tcld namespace accepted-client-ca set --ca-certificate <value>

Alias: s

When updating CA certificates, it's important to follow a rollover process. Doing so enables your Namespace to serve both CA certificates for a period of time until traffic to your old CA certificate ceases.

  1. Create a single file that contains both your old and new CA certificate PEM blocks. Just concatenate the PEM blocks on adjacent lines.

    -----BEGIN CERTIFICATE-----
    ... old CA cert ...
    -----END CERTIFICATE-----
    -----BEGIN CERTIFICATE-----
    ... new CA cert ...
    -----END CERTIFICATE-----

  2. Run the tcld namespace accepted-client-ca set command with the CA certificate bundle file.

    tcld namespace accepted-client-ca set --ca-certificate-file <path>

  3. Monitor traffic to your old certificate until it ceases.

  4. Create another file that contains only the new CA certificate.

  5. Run the tcld namespace accepted-client-ca set command again with the updated CA certificate bundle file.

The following modifiers control the behavior of the command.

--namespace​

Specify a Namespace hosted on Temporal Cloud. If not specified, the value of the environment variable $TEMPORAL_CLOUD_NAMESPACE is used.

Alias: -n

Example

tcld namespace accepted-client-ca set --namespace <namespace_id> --ca-certificate <encoded_certificate>

--request-id​

Specify a request identifier to use for the asynchronous operation. If not specified, the server assigns a request identifier.

Alias: -r

Example

tcld namespace accepted-client-ca set --request-id <request_id> --ca-certificate <encoded_certificate>

--resource-version​

Specify a resource version (ETag) to update from. If not specified, the latest version is used.

Alias: -v

Example

tcld namespace accepted-client-ca set --resource-version <etag> --ca-certificate <encoded_certificate>

--ca-certificate​

Required modifier unless --ca-certificate-file is specified

Specify a base64-encoded string of a CA certificate PEM file.

If both --ca-certificate and --ca-certificate-file are specified, only --ca-certificate is used.

Alias: -c

Example

tcld namespace accepted-client-ca set --ca-certificate <encoded_certificate>

--ca-certificate-file​

Required modifier unless --ca-certificate is specified

Specify a path to a CA certificate PEM file.

If both --ca-certificate and --ca-certificate-file are specified, only --ca-certificate is used.

Alias: -f

Example

tcld namespace accepted-client-ca set --ca-certificate-file <path>

certificate-filters​

The tcld namespace certificate-filters commands manage optional certificate filters for the specified Namespace in Temporal Cloud. The Namespace can use certificate filters to authorize client certificates based on distinguished name (DN) fields.

Alias: cf

add​

The tcld namespace certificates-filter add command adds additional certificate filters to the Namespace of a Temporal Cloud account.

The following modifiers control the behavior of the command.

--namespace​

Specify a Namespace hosted on Temporal Cloud. If not specified, the value of the environment variable $TEMPORAL_CLOUD_NAMESPACE is used.

Alias: -n

Example

tcld namespace certificate-filters add --namespace <namespace_id> --certificate-filter-file <file>

--request-id​

Specify a request identifier to use for the asynchronous operation. If not specified, the server assigns a request identifier.

Alias: -r

Example

tcld namespace certificate-filters add --request-id <request_id> --certificate-filter-file <file>

--resource-version​

Specify a resource version (ETag) to update from. If not specified, the latest version is used.

Alias: -v

Example

tcld namespace certificate-filters add --resource-version <etag> --certificate-filter-file <file>

--certificate-filter-file​

Required modifier unless --certificate-filter-value is specified.

Specify a path to a JSON file defining the certificate filters for the Namespace.

Aliases: -f, --file

Example

tcld namespace certificate-filters add --certificate-filter-file <file>

--certificate-filter-input​

Required modifier unless --certificate-filter-file is specified.

The certificate filters, in JSON, that will be added to the Namespace.

Aliases: -i, --input

Example

tcld namespace certificate-filters add --certificate-filter-input <JSON>

clear​

The tcld namespace certificate-filters clear command clears all certificate filters from a Namespace in Temporal Cloud.

caution

Using this command allows any client certificate that chains up to a configured CA certificate to connect to the Namespace.

tcld namespace certificate-filters clear

The following modifiers control the behavior of the command.

--namespace​

Specify a Namespace hosted on Temporal Cloud. If not specified, the value of the environment variable $TEMPORAL_CLOUD_NAMESPACE is used.

Alias: -n

Example

tcld namespace certificate-filters clear --namespace <namespace_id>

--request-id​

Specify a request identifier to use for the asynchronous operation. If not specified, the server assigns a request identifier.

Alias: -r

Example

tcld namespace certificate-filters clear --request-id <request_id>

--resource-version​

Specify a resource version (ETag) to update from. If not specified, the latest version is used.

Alias: -v

Example

tcld namespace certificate-filters clear --resource-version <etag>

export​

The tcld namespace certificate-filters export command exports existing certificate filters from a Namespace in Temporal Cloud.

tcld namespace certificate-filters export --certificate-filter-file <path>

Alias: exp

The following modifiers control the behavior of the command.

--certificate-filter-file​

Specify a path to a JSON file where tcld can export the certificate filters.

Aliases: --file, -f

Example

tcld namespace certificate-filters export --certificate-filter-file <path>

--namespace​

Specify a Namespace hosted on Temporal Cloud. If not specified, the value of the environment variable $TEMPORAL_CLOUD_NAMESPACE is used.

Alias: -n

Example

tcld namespace certificate-filters import --namespace <namespace_id> --certificate-filter-input <json>

--request-id​

Specify a request identifier to use for the asynchronous operation. If not specified, the server assigns a request identifier.

Alias: -r

Example

tcld namespace certificate-filters import --request-id <request_id> --certificate-filter-input <json>

--resource-version​

Specify a resource version (ETag) to update from. If not specified, the latest version is used.

Alias: -v

Example

tcld namespace certificate-filters import --resource-version <etag> --certificate-filter-input <json>

import​

The tcld namespace certificate-filters import command sets certificate filters for a Namespace in Temporal Cloud.

tcld namespace certificate-filters import --certificate-filter-file <path>

Alias: imp

A certificate filter can include any combination (and at least one) of the following:

  • commonName
  • organization
  • organizationalUnit
  • subjectAlternativeName

The following modifiers control the behavior of the command.

--certificate-filter-file​

Required modifier unless --certificate-filter-input is specified

Specify a path to a JSON file that defines certificate filters to be applied to the Namespace, such as { "filters": [ { "commonName": "test1" } ] }. The specified filters replace any existing filters.

If both --certificate-filter-file and --certificate-filter-input are specified, the command returns an error.

Aliases: --file, -f

Example

tcld namespace certificate-filters import --certificate-filter-file <path>

--certificate-filter-input​

Required modifier unless --certificate-filter-file is specified

Specify a JSON string that defines certificate filters to be applied to the Namespace, such as { "filters": [ { "commonName": "test1" } ] }. The specified filters replace any existing filters.

If both --certificate-filter-input and --certificate-filter-file are specified, the command returns an error.

Aliases: --input, -i

Example

tcld namespace certificate-filters import --certificate-filter-input <json>

--namespace​

Specify a Namespace hosted on Temporal Cloud. If not specified, the value of the environment variable $TEMPORAL_CLOUD_NAMESPACE is used.

Alias: -n

Example

tcld namespace certificate-filters import --namespace <namespace_id> --certificate-filter-input <json>

--request-id​

Specify a request identifier to use for the asynchronous operation. If not specified, the server assigns a request identifier.

Alias: -r

Example

tcld namespace certificate-filters import --request-id <request_id> --certificate-filter-input <json>

--resource-version​

Specify a resource version (ETag) to update from. If not specified, the latest version is used.

Alias: -v

Example

tcld namespace certificate-filters import --resource-version <etag> --certificate-filter-input <json>

search-attributes​

The tcld namespace search-attributes commands manage Search Attributes of the specified Namespace in Temporal Cloud.

Alias: sa

add​

The tcld namespace search-attributes add command adds custom Search Attributes to a Namespace in Temporal Cloud.

tcld namespace search-attributes add --search-attribute <value>

Alias: a

The following modifiers control the behavior of the command.

--namespace​

Specify a Namespace hosted on Temporal Cloud. If not specified, the value of the environment variable $TEMPORAL_CLOUD_NAMESPACE is used.

Alias: -n

Example

tcld namespace search-attributes add --namespace <namespace_id> --search-attribute <value>

--request-id​

Specify a request identifier to use for the asynchronous operation. If not specified, the server assigns a request identifier.

Alias: -r

Example

tcld namespace search-attributes add --request-id <request_id> --search-attribute <value>

--resource-version​

Specify a resource version (ETag) to update from. If not specified, the latest version is used.

Alias: -v

Example

tcld namespace search-attributes add --resource-version <etag> --search-attribute <value>

--search-attribute​

Required modifier; can be specified more than once

Specify a custom Search Attribute in the form "name=type". Valid values for type are as follows:

  • Bool
  • Datetime
  • Double
  • Int
  • Keyword
  • Text

Alias: --sa

Example

tcld namespace search-attributes add --search-attribute "YourSearchAttribute1=Text" --search-attribute "YourSearchAttribute2=Double"

rename​

The tcld namespace search-attributes rename command renames a custom Search Attribute in Temporal Cloud.

tcld namespace search-attributes rename --existing-name <value> --new-name <value>

The following modifiers control the behavior of the command.

--namespace​

Specify a Namespace hosted on Temporal Cloud. If not specified, the value of the environment variable $TEMPORAL_CLOUD_NAMESPACE is used.

Alias: -n

Example

tcld namespace search-attributes rename --namespace <namespace_id> --existing-name <value> --new-name <value>

--request-id​

Specify a request identifier to use for the asynchronous operation. If not specified, the server assigns a request identifier.

Alias: -r

Example

tcld namespace search-attributes rename --request-id <request_id> --existing-name <value> --new-name <value>

--resource-version​

Specify a resource version (ETag) to update from. If not specified, the latest version is used.

Alias: -v

Example

tcld namespace search-attributes rename --resource-version <etag> --existing-name <value> --new-name <value>

--existing-name​

Required modifier

Specify the name of an existing Search Attribute.

Alias: --en

Example

tcld namespace search-attributes rename --existing-name <value> --new-name <value>

--new-name​

Required modifier

Specify a new name for the Search Attribute.

Alias: --nn

Example

tcld namespace search-attributes rename --existing-name <value> --new-name <value>

retention​

The tcld namespace retention commands manage the length of time (in days) a closed Workflow is preserved before deletion for a given Namespace in Temporal Cloud.

Alias: r

get​

Retrieve the length of time (in days) a closed Workflow will be preserved before deletion for the specified Namespace.

Alias: g

The following modifier controls the behavior of the command.

--namespace​

Required modifier

Specify a Namespace hosted on Temporal Cloud. If not specified, the value of the environment variable $TEMPORAL_CLOUD_NAMESPACE is used.

Alias: -n

Example

tcld namespace retention get --namespace <namespace_id>

set​

Set the length of time (in days) a closed Workflow will be preserved before deletion for the specified Namespace.

Alias: s

The following modifiers control the behavior of the command.

--namespace​

Required modifier

Specify a Namespace hosted on Temporal Cloud. If not specified, the value of the environment variable $TEMPORAL_CLOUD_NAMESPACE is used.

Alias: -n

--retention-days​

Required modifier

Specify the number of days a closed Workflow will be preserved before deletion.

Alias: --rd

Example

tcld namespace retention set --namespace <namespace_id> --retention-days <retention_days>

update-codec-server​

The tcld namespace update-codec-server command updates the configuration of a codec server for Temporal Cloud, which allows payloads to be decodec through a remote endpoint.

Alias: ucs

The following modifiers control the behavior of the command.

--namespace​

Required modifier.

Specify a Namespace hosted on Temporal Cloud. If not specified, the value of the environment variable $TEMPORAL_CLOUD_NAMESPACE is used.

Alias: -n

Example

tcld namespace update-codec-server --namespace <namespace_id> --endpoint <http_url>

--endpoint​

Required modifier.

Specify an endpoint to decode payloads for all users interacting with this Namespace. Endpoints must be valid https URLs.

Alias: -e

Example

tcld namespace update-codec-server --namespace <namespace_id> --endpoint <https_url>

--pass-access-token​

Enables a user access token to be passed with the remote endpoint. This is set to false by default.

Alias: --pat

Example

tcld namespace update-codec-server --namespace <namespace_id> --endpoint <https_url> --pass-access-token <bool>

--include-credentials​

Enables the inclusion of cross-origin credentials. This is set to false by default.

Alias: --ic

Example

tcld namespace update-codec-server --namespace <namespace_id> --endpoint <https_url> --include-credentials true